SAFETY GUIDELINES FOR VISITORS This guideline is meant to provide information regarding the basic safety precautions that should be adhered to by all visitors. Visitor Registration All visitors MUST register at the guard house and obtain a visitor’s tag and visitor’s slip from the guard on duty. The visitor’s tag issued MUST be worn at all times. The visitor’s slip MUST be filled up and signed off by the staff being visited. All personal visitors will be restricted to the guard house or reception area only. Visitors also MUST fill up the Visitor Declaration Form at the receptionist area before entering to the production area. All visitors with official engagement (suppliers, customers, contractors and government officials MUST always be accompanied by an employee of the company. All personal visitors will be restricted to the guard house or reception area only. Visitor’s vehicles should be parked outside the company premise or designated parking lots within the premise. Please be reminded, always, the speed limit within the company’s premise is 15km/h. Any incoming and outgoing delivery vehicles are restricted to and MUST be properly parked at the warehouse area only. Smoking Restriction Smoking is strictly prohibited within the company premise EXCEPT at the designated location i.e. (only at certain designated area) and by the side of the guard post. Safety signage All safety signages within the company premise MUST be adhered at all times. Moving Vehicles Do be conscious, at all times, of potential moving vehicles within the company premise i.e. forklifts, stackers, lorries, cars and motorcycles. Machines, Hoists and Cranes Inside the factory, be constantly aware of moving machine parts, overhead hoist and cranes. Stay away from moving hoists and cranes. Always walk within the designated walkways. Please do not touch any machines or start a conversation with any company personnel on duty to avoid distracting them. Chemical Don't touch / lean againts chemical drums or containers. Fire If the fire alarm is sounded, do not panic! Please follow the instructions of our employee accompanying you and go to the nearest EXIT signage. Walk quickly but do not run. Assemble at the company’s assembly point (next to guard house and facing to the warehouse) for a roll call. Do not leave the premise until the roll call is completed.
Additional Safety Requirements For Contractors Contractors and their workers coming in to carry out repairs, maintenance, installation, upgrading, renovation and building work for machineries, facilities and building are also required to adhere to the relevant safe work practices in their areas of work such as (not necessarily limited to the following) : MUST wear safety shoes at all times MUST wear safety goggles, shield, gloves when carrying out construction work such as grinding, welding (hot work) MUST wear safety helmet when carrying out construction work Use safe scaffolding and safety harness when working at height Activities such as hot work, working at height and night work MUST have the permit to work before the work being carried out. The form can be obtained from the Safety and Health Executive.
SAFETY & HEALTH ACTIVITIES 1. Training 2. Industrial Hygiene Monitoring a. Annual local exhaust ventilation monitoring b. Annual chemical exposure monitoring c. Chemical Health Risk Assessment 3. Health Monitoring a. Annual medical surveillance 4. Road Accident Awareness 5. Evacuation Drill 6. Fire Drill 7. Natural Disaster Simulation 8. Recycle Program 9. Safety Quiz 10. Tool Box Meeting 11. Safety & Health Inspection 12. Safety & Health Best Practice Competition 13. Safety & Health Meeting 14. Safety & Health Week ENVIRONMENT ACTIVITIES 1. Environmental Exposure Monitoring a. Isokinetic stack monitoring b. Daily waste water effluent monitoring 2. Implementation of Environmental Mainstream Tool (since February 2017) 3. Chemical Spillage Simulation 4. Environment Inspection 5. Environment Best Practice Competition 6. Environment Meeting 7. Environment Week

 

SAFETY GUIDELINES FOR VISITORS This guideline is meant to provide information regarding the basic safety precautions that should be adhered to by all visitors. Visitor Registration All visitors MUST register at the guard house and obtain a visitor’s tag and visitor’s slip from the guard on duty. The visitor’s tag issued MUST be worn at all times. The visitor’s slip MUST be filled up and signed off by the staff being visited. All personal visitors will be restricted to the guard house or reception area only. Visitors also MUST fill up the Visitor Declaration Form at the receptionist area before entering to the production area. All visitors with official engagement (suppliers, customers, contractors and government officials MUST always be accompanied by an employee of the company. All personal visitors will be restricted to the guard house or reception area only. Visitor’s vehicles should be parked outside the company premise or designated parking lots within the premise. Please be reminded, always, the speed limit within the company’s premise is 15km/h. Any incoming and outgoing delivery vehicles are restricted to and MUST be properly parked at the warehouse area only. Smoking Restriction Smoking is strictly prohibited within the company premise EXCEPT at the designated location i.e. (only at certain designated area) and by the side of the guard post. Safety signage All safety signages within the company premise MUST be adhered at all times. Moving Vehicles Do be conscious, at all times, of potential moving vehicles within the company premise i.e. forklifts, stackers, lorries, cars and motorcycles. Machines, Hoists and Cranes Inside the factory, be constantly aware of moving machine parts, overhead hoist and cranes. Stay away from moving hoists and cranes. Always walk within the designated walkways. Please do not touch any machines or start a conversation with any company personnel on duty to avoid distracting them. Chemical Don't touch / lean againts chemical drums or containers. Fire If the fire alarm is sounded, do not panic! Please follow the instructions of our employee accompanying you and go to the nearest EXIT signage. Walk quickly but do not run. Assemble at the company’s assembly point (next to guard house and facing to the warehouse) for a roll call. Do not leave the premise until the roll call is completed.
Additional Safety Requirements For Contractors Contractors and their workers coming in to carry out repairs, maintenance, installation, upgrading, renovation and building work for machineries, facilities and building are also required to adhere to the relevant safe work practices in their areas of work such as (not necessarily limited to the following) : MUST wear safety shoes at all times MUST wear safety goggles, shield, gloves when carrying out construction work such as grinding, welding (hot work) MUST wear safety helmet when carrying out construction work Use safe scaffolding and safety harness when working at height Activities such as hot work, working at height and night work MUST have the permit to work before the work being carried out. The form can be obtained from the Safety and Health Executive.
SAFETY & HEALTH ACTIVITIES 1. Training 2. Industrial Hygiene Monitoring a. Annual local exhaust ventilation monitoring b. Annual chemical exposure monitoring c. Chemical Health Risk Assessment 3. Health Monitoring a. Annual medical surveillance 4. Road Accident Awareness 5. Evacuation Drill 6. Fire Drill 7. Natural Disaster Simulation 8. Recycle Program 9. Safety Quiz 10. Tool Box Meeting 11. Safety & Health Inspection 12. Safety & Health Best Practice Competition 13. Safety & Health Meeting 14. Safety & Health Week ENVIRONMENT ACTIVITIES 1. Environmental Exposure Monitoring a. Isokinetic stack monitoring b. Daily waste water effluent monitoring 2. Implementation of Environmental Mainstream Tool (since February 2017) 3. Chemical Spillage Simulation 4. Environment Inspection 5. Environment Best Practice Competition 6. Environment Meeting 7. Environment Week
SAFETY GUIDELINES FOR VISITORS This guideline is meant to provide information regarding the basic safety precautions that should be adhered to by all visitors. Visitor Registration All visitors MUST register at the guard house and obtain a visitor’s tag and visitor’s slip from the guard on duty. The visitor’s tag issued MUST be worn at all times. The visitor’s slip MUST be filled up and signed off by the staff being visited. All personal visitors will be restricted to the guard house or reception area only. Visitors also MUST fill up the Visitor Declaration Form at the receptionist area before entering to the production area. All visitors with official engagement (suppliers, customers, contractors and government officials MUST always be accompanied by an employee of the company. All personal visitors will be restricted to the guard house or reception area only. Visitor’s vehicles should be parked outside the company premise or designated parking lots within the premise. Please be reminded, always, the speed limit within the company’s premise is 15km/h. Any incoming and outgoing delivery vehicles are restricted to and MUST be properly parked at the warehouse area only. Smoking Restriction Smoking is strictly prohibited within the company premise EXCEPT at the designated location i.e. (only at certain designated area) and by the side of the guard post. Safety signage All safety signages within the company premise MUST be adhered at all times. Moving Vehicles Do be conscious, at all times, of potential moving vehicles within the company premise i.e. forklifts, stackers, lorries, cars and motorcycles. Machines, Hoists and Cranes Inside the factory, be constantly aware of moving machine parts, overhead hoist and cranes. Stay away from moving hoists and cranes. Always walk within the designated walkways. Please do not touch any machines or start a conversation with any company personnel on duty to avoid distracting them. Chemical Don't touch / lean againts chemical drums or containers. Fire If the fire alarm is sounded, do not panic! Please follow the instructions of our employee accompanying you and go to the nearest EXIT signage. Walk quickly but do not run. Assemble at the company’s assembly point (next to guard house and facing to the warehouse) for a roll call. Do not leave the premise until the roll call is completed.
Additional Safety Requirements For Contractors Contractors and their workers coming in to carry out repairs, maintenance, installation, upgrading, renovation and building work for machineries, facilities and building are also required to adhere to the relevant safe work practices in their areas of work such as (not necessarily limited to the following) : MUST wear safety shoes at all times MUST wear safety goggles, shield, gloves when carrying out construction work such as grinding, welding (hot work) MUST wear safety helmet when carrying out construction work Use safe scaffolding and safety harness when working at height Activities such as hot work, working at height and night work MUST have the permit to work before the work being carried out. The form can be obtained from the Safety and Health Executive.
ENVIRONMENT ACTIVITIES 1. Environmental Exposure Monitoring a. Isokinetic stack monitoring b. Daily waste water effluent monitoring 2. Implementation of Environmental Mainstream Tool (since February 2017) 3. Chemical Spillage Simulation 4. Environment Inspection 5. Environment Best Practice Competition 6. Environment Meeting 7. Environment Week
SAFETY & HEALTH ACTIVITIES 1. Training 2. Industrial Hygiene Monitoring a. Annual local exhaust ventilation monitoring b. Annual chemical exposure monitoring c. Chemical Health Risk Assessment 3. Health Monitoring a. Annual medical surveillance 4. Road Accident Awareness 5. Evacuation Drill 6. Fire Drill 7. Natural Disaster Simulation 8. Recycle Program 9. Safety Quiz 10. Tool Box Meeting 11. Safety & Health Inspection 12. Safety & Health Best Practice Competition 13. Safety & Health Meeting 14. Safety & Health Week
SAFETY GUIDELINES FOR VISITORS This guideline is meant to provide information regarding the basic safety precautions that should be adhered to by all visitors. Visitor Registration All visitors MUST register at the guard house and obtain a visitor’s tag and visitor’s slip from the guard on duty. The visitor’s tag issued MUST be worn at all times. The visitor’s slip MUST be filled up and signed off by the staff being visited. All personal visitors will be restricted to the guard house or reception area only. Visitors also MUST fill up the Visitor Declaration Form at the receptionist area before entering to the production area. All visitors with official engagement (suppliers, customers, contractors and government officials MUST always be accompanied by an employee of the company. All personal visitors will be restricted to the guard house or reception area only. Visitor’s vehicles should be parked outside the company premise or designated parking lots within the premise. Please be reminded, always, the speed limit within the company’s premise is 15km/h. Any incoming and outgoing delivery vehicles are restricted to and MUST be properly parked at the warehouse area only. Smoking Restriction Smoking is strictly prohibited within the company premise EXCEPT at the designated location i.e. (only at certain designated area) and by the side of the guard post. Safety signage All safety signages within the company premise MUST be adhered at all times. Moving Vehicles Do be conscious, at all times, of potential moving vehicles within the company premise i.e. forklifts, stackers, lorries, cars and motorcycles. Machines, Hoists and Cranes Inside the factory, be constantly aware of moving machine parts, overhead hoist and cranes. Stay away from moving hoists and cranes. Always walk within the designated walkways. Please do not touch any machines or start a conversation with any company personnel on duty to avoid distracting them. Chemical Don't touch / lean againts chemical drums or containers. Fire If the fire alarm is sounded, do not panic! Please follow the instructions of our employee accompanying you and go to the nearest EXIT signage. Walk quickly but do not run. Assemble at the company’s assembly point (next to guard house and facing to the warehouse) for a roll call. Do not leave the premise until the roll call is completed.
Additional Safety Requirements For Contractors Contractors and their workers coming in to carry out repairs, maintenance, installation, upgrading, renovation and building work for machineries, facilities and building are also required to adhere to the relevant safe work practices in their areas of work such as (not necessarily limited to the following) : MUST wear safety shoes at all times MUST wear safety goggles, shield, gloves when carrying out construction work such as grinding, welding (hot work) MUST wear safety helmet when carrying out construction work Use safe scaffolding and safety harness when working at height Activities such as hot work, working at height and night work MUST have the permit to work before the work being carried out. The form can be obtained from the Safety and Health Executive.
SAFETY & HEALTH ACTIVITIES 1. Training 2. Industrial Hygiene Monitoring a. Annual local exhaust ventilation monitoring b. Annual chemical exposure monitoring c. Chemical Health Risk Assessment 3. Health Monitoring a. Annual medical surveillance 4. Road Accident Awareness 5. Evacuation Drill 6. Fire Drill 7. Natural Disaster Simulation 8. Recycle Program 9. Safety Quiz 10. Tool Box Meeting 11. Safety & Health Inspection 12. Safety & Health Best Practice Competition 13. Safety & Health Meeting 14. Safety & Health Week
ENVIRONMENT ACTIVITIES 1. Environmental Exposure Monitoring a. Isokinetic stack monitoring b. Daily waste water effluent monitoring 2. Implementation of Environmental Mainstream Tool (since February 2017) 3. Chemical Spillage Simulation 4. Environment Inspection 5. Environment Best Practice Competition 6. Environment Meeting 7. Environment Week
SAFETY GUIDELINES FOR VISITORS This guideline is meant to provide information regarding the basic safety precautions that should be adhered to by all visitors. Visitor Registration All visitors MUST register at the guard house and obtain a visitor’s tag and visitor’s slip from the guard on duty. The visitor’s tag issued MUST be worn at all times. The visitor’s slip MUST be filled up and signed off by the staff being visited. All personal visitors will be restricted to the guard house or reception area only. Visitors also MUST fill up the Visitor Declaration Form at the receptionist area before entering to the production area. All visitors with official engagement (suppliers, customers, contractors and government officials MUST always be accompanied by an employee of the company. All personal visitors will be restricted to the guard house or reception area only. Visitor’s vehicles should be parked outside the company premise or designated parking lots within the premise. Please be reminded, always, the speed limit within the company’s premise is 15km/h. Any incoming and outgoing delivery vehicles are restricted to and MUST be properly parked at the warehouse area only. Smoking Restriction Smoking is strictly prohibited within the company premise EXCEPT at the designated location i.e. (only at certain designated area) and by the side of the guard post. Safety signage All safety signages within the company premise MUST be adhered at all times. Moving Vehicles Do be conscious, at all times, of potential moving vehicles within the company premise i.e. forklifts, stackers, lorries, cars and motorcycles. Machines, Hoists and Cranes Inside the factory, be constantly aware of moving machine parts, overhead hoist and cranes. Stay away from moving hoists and cranes. Always walk within the designated walkways. Please do not touch any machines or start a conversation with any company personnel on duty to avoid distracting them. Chemical Don't touch / lean againts chemical drums or containers. Fire If the fire alarm is sounded, do not panic! Please follow the instructions of our employee accompanying you and go to the nearest EXIT signage. Walk quickly but do not run. Assemble at the company’s assembly point (next to guard house and facing to the warehouse) for a roll call. Do not leave the premise until the roll call is completed.
Additional Safety Requirements For Contractors Contractors and their workers coming in to carry out repairs, maintenance, installation, upgrading, renovation and building work for machineries, facilities and building are also required to adhere to the relevant safe work practices in their areas of work such as (not necessarily limited to the following) : MUST wear safety shoes at all times MUST wear safety goggles, shield, gloves when carrying out construction work such as grinding, welding (hot work) MUST wear safety helmet when carrying out construction work Use safe scaffolding and safety harness when working at height Activities such as hot work, working at height and night work MUST have the permit to work before the work being carried out. The form can be obtained from the Safety and Health Executive.
SAFETY & HEALTH ACTIVITIES 1. Training 2. Industrial Hygiene Monitoring a. Annual local exhaust ventilation monitoring b. Annual chemical exposure monitoring c. Chemical Health Risk Assessment 3. Health Monitoring a. Annual medical surveillance 4. Road Accident Awareness 5. Evacuation Drill 6. Fire Drill 7. Natural Disaster Simulation 8. Recycle Program 9. Safety Quiz 10. Tool Box Meeting 11. Safety & Health Inspection 12. Safety & Health Best Practice Competition 13. Safety & Health Meeting 14. Safety & Health Week ENVIRONMENT ACTIVITIES 1. Environmental Exposure Monitoring a. Isokinetic stack monitoring b. Daily waste water effluent monitoring 2. Implementation of Environmental Mainstream Tool (since February 2017) 3. Chemical Spillage Simulation 4. Environment Inspection 5. Environment Best Practice Competition 6. Environment Meeting 7. Environment Week
SAFETY GUIDELINES FOR VISITORS This guideline is meant to provide information regarding the basic safety precautions that should be adhered to by all visitors. Visitor Registration All visitors MUST register at the guard house and obtain a visitor’s tag and visitor’s slip from the guard on duty. The visitor’s tag issued MUST be worn at all times. The visitor’s slip MUST be filled up and signed off by the staff being visited. All personal visitors will be restricted to the guard house or reception area only. Visitors also MUST fill up the Visitor Declaration Form at the receptionist area before entering to the production area. All visitors with official engagement (suppliers, customers, contractors and government officials MUST always be accompanied by an employee of the company. All personal visitors will be restricted to the guard house or reception area only. Visitor’s vehicles should be parked outside the company premise or designated parking lots within the premise. Please be reminded, always, the speed limit within the company’s premise is 15km/h. Any incoming and outgoing delivery vehicles are restricted to and MUST be properly parked at the warehouse area only. Smoking Restriction Smoking is strictly prohibited within the company premise EXCEPT at the designated location i.e. (only at certain designated area) and by the side of the guard post. Safety signage All safety signages within the company premise MUST be adhered at all times. Moving Vehicles Do be conscious, at all times, of potential moving vehicles within the company premise i.e. forklifts, stackers, lorries, cars and motorcycles. Machines, Hoists and Cranes Inside the factory, be constantly aware of moving machine parts, overhead hoist and cranes. Stay away from moving hoists and cranes. Always walk within the designated walkways. Please do not touch any machines or start a conversation with any company personnel on duty to avoid distracting them. Chemical Don't touch / lean againts chemical drums or containers. Fire If the fire alarm is sounded, do not panic! Please follow the instructions of our employee accompanying you and go to the nearest EXIT signage. Walk quickly but do not run. Assemble at the company’s assembly point (next to guard house and facing to the warehouse) for a roll call. Do not leave the premise until the roll call is completed.
Additional Safety Requirements For Contractors Contractors and their workers coming in to carry out repairs, maintenance, installation, upgrading, renovation and building work for machineries, facilities and building are also required to adhere to the relevant safe work practices in their areas of work such as (not necessarily limited to the following) : MUST wear safety shoes at all times MUST wear safety goggles, shield, gloves when carrying out construction work such as grinding, welding (hot work) MUST wear safety helmet when carrying out construction work Use safe scaffolding and safety harness when working at height Activities such as hot work, working at height and night work MUST have the permit to work before the work being carried out. The form can be obtained from the Safety and Health Executive.
SAFETY & HEALTH ACTIVITIES 1. Training 2. Industrial Hygiene Monitoring a. Annual local exhaust ventilation monitoring b. Annual chemical exposure monitoring c. Chemical Health Risk Assessment 3. Health Monitoring a. Annual medical surveillance 4. Road Accident Awareness 5. Evacuation Drill 6. Fire Drill 7. Natural Disaster Simulation 8. Recycle Program 9. Safety Quiz 10. Tool Box Meeting 11. Safety & Health Inspection 12. Safety & Health Best Practice Competition 13. Safety & Health Meeting 14. Safety & Health Week
ENVIRONMENT ACTIVITIES 1. Environmental Exposure Monitoring a. Isokinetic stack monitoring b. Daily waste water effluent monitoring 2. Implementation of Environmental Mainstream Tool (since February 2017) 3. Chemical Spillage Simulation 4. Environment Inspection 5. Environment Best Practice Competition 6. Environment Meeting 7. Environment Week